HEAD IMPACT PAD REMOVAL/INSTALLATION


BHE09176852XW01

1. Remove the following parts:

(1) Roof side trim (See ROOF SIDE TRIM REMOVAL/INSTALLATION.)
(2) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
(3) Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)
(4) Inner scuff plate (See INNER SCUFF PLATE REMOVAL/INSTALLATION.)
(5) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
(6) Rear pillar trim (See REAR PILLAR TRIM REMOVAL/INSTALLATION.)
(7) Map light (See MAP LIGHT REMOVAL/INSTALLATION.)
(8) Interior light (See INTERIOR LIGHT REMOVAL/INSTALLATION.)
(9) Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)
(10) Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)
(11) Headliner (See HEADLINER REMOVAL/INSTALLATION.)

2. Remove the fastener. (Rear)

3. Pull the head impact pad outward and detach clips A and B. (Front)

4. Pull the head impact pad outward and detach clips B. (Rear)

5. Remove the head impact pad.

6. Install in the reverse order of removal.