PID/DATA MONITOR TABLE


BHE080201046W07

PID name (definition)

Unit/Condition

Operation Condition (Reference)

Terminal

CCNT_RCM
(Number of continuous DTCs)
• DTCs detected: 1-255
• No DTCs detected: 0
D_ABAGR2
(Driver-side air bag module (inflator No.2) resistance)
Ohms
Under any condition: 1.5-3.7 ohms
1G, 1J
D_CRSH_S
(Driver-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
• Sensor normal: OK
• Sensor communication error: COMM_FAIL
• Sensor internal circuit abnormal: INT_FAIL
2Z, 2AA
DABAGR
(Driver-side air bag module (inflator No.1) resistance)
Ohms
Under any condition: 1.5-3.7 ohms
1S, 1V
D_PTENSFLT
(Driver-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2P, 2S
DR_BUKL
(Driver-side buckle switch status)
Buckled/
Unbuckled
• Driver-side buckle switch on: Buckled
• Driver-side buckle switch off: Unbuckled
2T
DR_CURTN
(Driver-side curtain air bag module resistance)
Ohms
Under any condition: 1.4-3.2 ohms
2V, 2Y
DR_PTENS
(Driver-side pre-tensioner seat belt resistance)
Ohms
Under any condition: 1.5-3.1 ohms
2P, 2S
DS_AB
(Driver-side side air bag module resistance)
Ohms
Under any condition: 1.4-3.2 ohms
2M, 2O
DS_AB_ST
(Driver-side side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2M, 2O
DS_CURT_ST
(Driver-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2V, 2Y
DS1_STAT
(Driver-side air bag module (inflator No.1) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1S, 1V
DS2_STAT
(Driver-side air bag module (inflator No.2) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1G, 1J
DSB_P_ST
(Driver-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2P, 2S
FNT_CRSH_S
(Crash zone sensor status)
OK/
COMM_FAIL/
INT_FAIL
• Sensor normal: OK
• Sensor communication error: COMM_FAIL
• Sensor internal circuit abnormal: INT_FAIL
1B, 1C
OD_D_CRSH
(Driver-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
• Sensor normal: OK
• Sensor communication error: COMM_FAIL
• Sensor internal circuit abnormal: INT_FAIL
2Z, 2AA
OD_D_CURT
(Driver-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2V, 2Y
OD_DAB1_ST
(Driver-side air bag module (inflator No.1) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1S, 1V
OD_DAB2_ST
(Driver-side air bag module (inflator No.2) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1G, 1J
OD_DSAB_ST
(Driver-side side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2M, 2O
OD_F_CRSH
(Crash zone sensor status)
OK/
COMM_FAIL/
INT_FAIL
• Sensor normal: OK
• Sensor communication error: COMM_FAIL
• Sensor internal circuit abnormal: INT_FAIL
1B, 1C
OD_P_CRSH
(Passenger-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
• Sensor normal: OK
• Sensor communication error: COMM_FAIL
• Sensor internal circuit abnormal: INT_FAIL
2B, 2C
OD_P_CURT
(Passenger-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2A, 2D
OD_PAB1_ST
(Passenger-side air bag module (inflator No.1) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1M, 1P
OD_PAB2_ST
(Passenger-side air bag module (inflator No.2) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1A, 1D
OD_PSAB_ST
(Passenger-side side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2I, 2L
P_ABAGR2
(Passenger-side air bag module (inflator No.2) resistance)
Ohms
Under any condition: 1.4-2.9 ohms
1A, 1D
P_PTENSFLT
(Passenger-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2G, 2J
PABAGR
(Passenger-side air bag module (inflator No.1) resistance)
Ohms
Under any condition: 1.4-2.9 ohms
1M, 1P
P_CRSH_S
(Passenger-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
• Sensor normal: OK
• Sensor communication error: COMM_FAIL
• Sensor internal circuit abnormal: INT_FAIL
2B, 2C
PS_AB
(Passenger-side side air bag module resistance)
Ohms
Under any condition: 1.4-3.2 ohms
2I, 2L
PS_AB_ST
(Passenger-side side air bag sensor circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2I, 2L
PS_CURTN
(Passenger-side curtain air bag module resistance)
Ohms
Under any condition: 1.4-3.2 ohms
2A, 2D
PS_CURT_ST
(Passenger-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
2A, 2D
PS_PTENS
(Passenger-side pre-tensioner seat belt resistance)
Ohms
Under any condition: 1.5-3.1 ohms
2G, 2J
PS1_STAT
(Passenger-side air bag module (inflator No.1) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1M, 1P
PS2_STAT
(Passenger-side air bag module (inflator No.2) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Air bag module circuit resistance low: SQ_LOWRES
1A, 1D
PSB_P_ST
(Passenger-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
• Related wiring harness normal: NORMAL
• Related wiring harness circuit open: OPEN
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2G, 2J
RCM_VOLT
(IG1 voltage)
V
• Ignition switch is at ON: B+
• Other: 0
1W