CALIPER (FRONT) DISASSEMBLY/ASSEMBLY


BHE041133990W01

1. Disassemble in the order indicated in the table.

1
Bleeder cap
2
Bleeder screw
3
Bolt
4
Sleeve
5
Piston
6
Dust seal
7
Piston seal
8
Caliper body

2. Assemble in the reverse order of disassembly.

Piston Disassembly Note

Caution
• The piston could be damaged if blown out with great force. Blow the compressed air slowly to prevent the piston from suddenly popping out.

1. Insert a piece of wood in the caliper as shown in the figure, and then blow compressed air through the bleeder screw hole to remove the piston from the caliper body.