FAN MOTOR REMOVAL/INSTALLATION


BHE011215140W01

1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION.)

2. Remove the battery cover.

3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION.)

4. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT.)

5. Remove the following.

(1) Splash shield
(2) Under cover
(3) Battery and battery box (See BATTERY REMOVAL/INSTALLATION.)
(4) Air cleaner component and air cleaner insulator (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)
(5) PCM duct

6. Position the coolant reserve tank out of the way. (See COOLANT RESERVE TANK REMOVAL/INSTALLATION.)

7. Disconnect the ATF oil cooler hose. (AT)

8. Remove the radiator and cooling fan component. (See RADIATOR REMOVAL/INSTALLATION.)

9. Remove in the order indicated in the table.

1
Cooling fan No.1
2
Cooling fan No.2
3
Cooling fan motor No.1
4
Cooling fan motor No.2
5
Radiator cowling

10. Install in the reverse order of removal.

11. Add engine coolant. (See ENGINE COOLANT REPLACEMENT.)

12. Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION.)